9
2.
Set up the slave / master mode.
This is for identifying the role of the device
as a master or slave.
Select Master, for DTE mode, for Data
Terminal Equipment (ex: PCs). Select Slave
for DCE mode, for Data Communication
Equipment (ex: Modem).
When you have two
RS-232 Serial to Bluetooth
Adapters
, you have to set one in master
mode via the terminal software. The adapter
is in slave-mode by default, and you can
choose either way to set the mode:
2.1. Using the ROLE command.
Type
ROLE=M
to set the adapter to the
master role. (Type
ROLE=S
to go back to
the default.)
Press Enter to see "OK". This means the
setup is successful.
