9
Windows Server 2003
1.
Install the board, boot up your system, and insert
the driver CD.
2.
When the Ethernet Controller is detected, choose
Install from a list or specific location (Advanced)
,
then click Next.
3.
Check Include this location in the search, uncheck
the other box, type D:\LAN\2003, click Next, then
Finish
. (Change D: to match your CD-ROM drive
letter)
4.
Right click My Computer, click Manage, then click
Device Manager
.
5.
Click the plus (+) sign next to IEEE 1394 Bus host
controllers
, then double click Texas Instruments
OHCI... 1394 Host Controller
.
6.
Click the Driver tab, click Update Driver....
7.
Select Install from a list or specific location
(Advanced)
, click Next.
8.
Select Don't search, I will choose the driver to
install
, click Next.
9..
Click Have Disk, type D:, click OK. (Change D: to
match your CD-ROM drive letter)
10. Select OHCI IEEE 1394b Host Controller, click
Next
.
11. Click Continue Anyway, then click Finish. Our
driver has been thoroughly tested in Windows for stability
and compatibility.
12. Close the open windows, then click Yes to restart to
complete the installation.