7
Windows 2000
1.
Install the board, boot up your system, and insert
the driver CD.
2.
When the Ethernet Controller is detected, at the
Found New Hardware Wizard
, click Next.
3.
Select Search for a suitable driver for my device
(recommended)
, then click Next.
4.
Check Specify a location, uncheck the other boxes,
then click Next.
5.
Type D:\LAN\2000, then click OK. (Change D: to
match your CD-ROM drive letter)
6.
Click Next, then Finish.
7.
Right click My Computer, click Manage, then click
Device Manager
.
8.
Click the plus (+) sign next to IEEE 1394 Bus host
controllers
, then double click Texas Instruments
OHCI... 1394 Host Controller
.
9.
Click the Driver tab, click Update Driver..., then
click Next.
10. Select Search for a suitable driver for my device
(recommended)
, click Next.
11. Check Specify a location, uncheck the other boxes,
click Next.
12. Type D:, click OK. (Change D: to match your
CD-ROM drive letter)
13. Click Next, then Finish.
14. Restart Windows to complete the installation.
