5
Software Installation
To ensure proper installation of this board, please follow
these instructions step-by-step.
Windows 98SE
1.
Install the board, boot up your system, and insert
the driver CD.
2.
At the Add New Hardware Wizard, when
PCI-to-PCI bridge
is detected, click Next.
3.
Select Search for the best driver for your device.
(Recommended)
, then click Next.
4.
Uncheck all boxes, click Next, Next, then Finish.
5.
When PCI Ethernet Controller is detected, click
Next
.
6.
Select Search for the best driver for your device.
(Recommended)
, then click Next.
7.
Select Specify a location, type D:\LAN\98SE, then
click Next. (Change D: to match your CD-ROM
drive letter)
8.
Click Next, then Finish.
Note:
If prompted, at the insert disk box click OK.
At the Copying files box, insert your Windows
98SE installation CD, click OK.
9.
When asked to restart click No.
10. When the OHCI Compliant IEEE 1394 Host
Controller
is detected, click Next.
11. Select Search for the best driver for your device.
(Recommended)
, then click Next.
12. Choose Specify a location, insert the driver CD,
type in D:, then click Next. (Change D: to match
your CD-ROM drive letter)
