SIIG eSATA II PCIe Pro, Быстрое руководство по установке

Страница: 9 / 16

9
Windows Server 2008 (64-bit)
New Server 2008 (64-bit) Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows? , click
Load Driver .
3. Insert the driver CD, click OK .
4. At Select the driver to be installed , click Browse .
5. Double click CD Drive ... Driver .
6. Double click 64bit folder.
For non-Itanium processors : Select AMD64 , click OK .
For Itanium processors : Select IA64 , click OK .
7. Select Silicon Image SiI 3132 ... Controller ... , then
click Next .
8. Follow the on-screen instructions to complete
Windows installation.
Existing Server 2008 (64-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, select Locate
and install driver software (Recommended) , then
click Don't Search Online .
3. Insert the driver CD and Windows will search the
CD and install the correct driver.
4. At Windows has finished installing the driver
software for this device , click Close to complete the
installation.