SIIG eSATA II PCIe Pro, Быстрое руководство по установке

Страница: 8 / 16

8
Existing Windows XP (64-bit) / 2003 (64-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware Wizard , select No, not
this time , then click Next .
3. Insert the driver CD, select Install the software
automatically (Recommended) , then click Next .
4. Click Finish to complete the installation.
Windows Server 2008 (32-bit)
New Server 2008 (32-bit) Installation
1. Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At Where do you want to install Windows? , click
Load Driver .
3. Insert the driver CD, click OK .
4. Select Silicon Image SiI 3132 ... Controller ... , then
click Next .
5. Follow the on-screen instructions to complete
Windows installation.
Existing Server 2008 (32-bit) Installation
1. Install the board and boot up Windows.
2. At the Found New Hardware window, select Locate
and install driver software (Recommended) , then
click Don't Search Online .
3. Insert the driver CD and Windows will search the
CD and install the correct driver.
4. At Windows has finished installing the driver
software for this device , click Close to complete the
installation.