SIIG eSATA II PCIe Pro, Быстрое руководство по установке

Страница: 6 / 16

6
6. At Select the driver to be installed , click Next .
7. Follow on-screen instructions to complete the
installation.
Existing Windows Vista (64-bit) Installation
1. Install the board and boot up Windows.
2. At Found New Hardware , insert the driver CD,
select Locate and install driver software
(Recommended) , then click Continue .
3. Click Next , then Close .
4. Remove the driver CD and restart Windows to
complete the installation.
Windows XP (32-bit) / Server 2003 (32-bit)
New Windows XP (32-bit) / 2003 (32-bit) Installation
A new installation of Windows XP / Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the contents of the Floppy folder,
found on the driver CD, onto a blank floppy disk then
follow the directions below.
1.
Install the board and follow Microsoft procedures
to install Windows accordingly.
2. At the Windows Setup screen, press F6 to install the
SATA II PCIe Pro driver.
3. Insert the driver floppy disk you made above. Press
S , then press Enter .
4. Select Silicon Image SiI 3132 ... Controller for
Windows XP and Server 2003 and press Enter .
5. Press Enter to continue and follow the on-screen
instructions to complete Windows installation.