SIIG Cool USB 2.0/eSATA to SATA Docking Duplicator, Быстрое руководство по установке

Страница: 8 / 12

8
Windows Disk Management
When installing a brand new hard disk drive or a blank
hard disk drive into the Cool USB 2.0/eSATA to SATA
Docking Duplicator , use Windows' Disk Management
utility to prepare it for use. Please visit Microsoft
support site at, http://support.microsoft.com/kb/
309000, for help and instructions.
Troubleshooting
eSATA
• If you are experiencing problems with eSATA,
please make sure to use fully compatible eSATA II
ports with full support for port multiplier function
and have installed the most up to date drivers.
• Switch on the Cool USB 2.0/eSATA to SATA Docking
Duplicator only after the system has fully booted
up and follow the installation procedure as
described in this manual.
• In case the Cool USB 2.0/eSATA to SATA Docking
Duplicator is not automatically detected by your
Windows system, the drivers and computer
hardware may not support eSATA hot-plug
function correctly. In this case try to update your
hardware drivers or to boot with the Cool USB 2.0/
eSATA to SATA Docking Duplicator and HDD
connected and turned on. If this doesn't help, go to
Device Manager and select Scan for New
Hardware .