27
Interface introduction:
The interface is to set up the EDID for each input port or all the input at once.
INPUT Section: the back content of the ">>" indicates the input source, and the front
content of the ">>" indicates the current EDID information. It supports set up the EDID
separately for each input or select all input as the same EDID.
EDID Section: There are two built-in EDID including 4K@30hz and 1080P.
Operating instructions
Select the input source that needs to change the EDID in the INPUT section ("ALL"
means select all input sources), the bottom of the input source is blue;
Select the EDID need to be copied in the EDID section, and click "Apply" to complete
the setting.
7.5.8 Audio output setting
Interface introduction:
The interface is used to switch and delay the audio of one output or all outputs. The
bottom is blue when the audio is turned on, and the bottom is white after mute; click
"All" to quickly select the output; the blue border indicates The output port is connected,
otherwise it is not; the default audio is turned on, and the delay is 30ms.
Operating instructions
The default settings are Unmute and delay 30ms;
Click on the "-/+" button to adjust delay time; options from 0 to 250, per unit is 10ms;
Click on the
button to choose mute or unmute.
