SIIG 04-0660A Скачать руководство пользователя страница 2

A1

D

(×4) M8/M6 rectangular washer

A2

E

(×6) M6 x 50 bolt

B1

F

(×6) M6 concrete anchor

B2

G1

(x6) M6 washer

C1

G2

External bubble level

C2

H

(×4) M5×12 screw

(×4) Spacer

(×4) M5×30 screw

(×4) M8×30 screw

(×4) M6×30 screw

Hardware kit:

Recommended mounting surfaces: wood stud and solid-flat concrete. If the mount is to be installed on any surface
other than wood studs, use suitable hardware (not included but commercially available).

Prior to the installation of this product, the installation instructions should be read and completely understood. The
installation instructions must be read to prevent personal injury and property damage. Keep these installation
instructions in an easily accessible location for future reference.

When mounting to a wall that contains wood studs, confirm dead center of the wood stud prior to installation, it is
recommended that the wood studs be a minimum of 16" apart.  

Caution

Do not install on a structure that is prone to vibration, movement or chance of impact. Failure to do so could result in
damage to the display and/or damage to the mounting surface.

The wall structure must be capable of supporting at least the maximum load capacity as indicated. If not, the wall must
be reinforced. Proper installation procedure by yourself or a qualified service technician, as outlined in the installation
instructions, must be adhered to. Failure to do so could result in serious personal injury.

It is recommended that two people perform the installation. Injury and/or damage can result from dropping or
mishandling the display.

(×4) M6×12 screw

(×4) M8×15 screw

Do not install near heater, fireplace, air conditioning, in direct sunlight, or any other heat producing source. Failure to do
so may result in damage to the display and could increase the risk of fire.

INSTALLATION AND OPERATING INSTRUCTIONS

CAUTION: The maximum load capacity is 132lbs. Use with products exceeding the maximum load capacity may cause
serious injury. See apparatus instructions.

2

Содержание 04-0660A









Отзывы: