63
ENGLISH
Setting items
INK MENU
Menu
Outline of functions
XXX INK LEVELZZZ%
DATE:YY/MM/DD
INK LEVEL shows remaining ink. DATE shows the manufactured date of ink cartridge.
MEDIA MENU
Menu
Outline of functions
ROLL(XXXXXX)
YYYmm
XXXXXX: Media name
YYYY: Media width
SHEET(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
FACE(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
BACK(XXXXXX)
YYYYmm
XXXXXX: Media name
YYYY: Media width
NEST(XXXXXX)
YYYmm
XXXXXX: Media name
YYYY: Media width
MEDIA REG MENU
Menu
Outline of functions
#SELECT MEDIA
>XX:YYYYYY
Select the media number of media to be registered or parameter-corrected.
#RENAME MEDIA
>XX:YYYYYY
Name (register) the media number selected in [SELECT MEDIA]. Six (6) digits of character (or code) can
be entered for the media name. For character string of 6 digits, codes, alphanumerics and katakana
characters can be used.
#MEDIA ADV VALUE
>XX:YYY.YY%
Set MEDIA ADVANCE VALUE. Set the advance value so that the banding (horizontal stripes of path
splicing) is not visible.
#USE EDGE GUARD
>XX:YES
Select whether to use the media edge guard or not. With this setting, the right and left margins of
media vary.
#MEDIA ADV MODE
>XX:FWD ONLY
Select a media advance mode.
#MEDIA BACK MODE
>XX:BACK & FWD
Select a media advance mode.
#SUCTION FAN LEVEL
>XX:HIGH
Select the force (air volume of fan) to suck the media to the platen.
#AFTERHEATER T
>XX:30°C
Set the afterheater temperature. However, when “**” is set, the postheater does not work.
#PRINTHEATER T
>XX:40ºC
Set the printheater temperature. However, when “**” is set, the print heater does not work.
#PREHEATER T
>XX:40°C
Set the preheater temperature. However, when “**” is set, the preheater does not work.
#COLOR STRIPE
>XX:ON
Select whether to print color stripes or not.
#PH HEIGHT VAL
>XX:+0.0
Adjust the print head height.
#IMAGE IMPROVE.
>XX:ON
Select whether to automatically correct the print quality or not.
#PH CLEANING
>XX:START & END
To keep the print head condition, select a cleaning mode which is automatically performed by the
printer.
#BACK ADJUST VAL
>XX:+0000PULSE
Set the back adjust value of media. This value is used to correct the splice of two images divided by the
auto-cleaning (PH CLEANING [MODE2] performed during printing.
#PH REST PERIOD
>XX:0000CYCLES
Scanning of the print head rests at every certain print length during printing. Set this time period to
prevent nozzle-out of the print head. Normally, set it to [0000CYCLES].
#PH REST TIME
>XX:10sec
Corresponding to [ PH REST PERIOD], set the scan rest time. When [0] is set for [PH REST PERIOD], this
parameter is ignored. Set this rest time to prevent nozzleout of the print head. Set it to [10 sec] as a rule
of thumb.
#BIDIR ADJ2 L CCC
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (NORMAL1, NORMAL2, QUALITY and DENSITY2) are set.
#BIDIR ADJ3 L CCC
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print modes (DRAFT1) are set.
#BIDIR ADJ4 L XXX
>XX:+00
The reciprocating correction adjusts the shift between two ways of bidirectional print. With this menu,
correction values for print mode (FINE DRAFT1) are set.
