Instruction Manual StackGuard
30
10266E/1
4.6
Setting the access code
With a self-defined access code, you can protect the StackGuard’s settings
against unauthorized manipulations .
Action Display
Remarks
1.
Activate service
mode
* SENSORCHECK *
* *
2.
3 x
n
* CONFIGURATION*
3.
4 x
q
> Access code <
000000
4.
2
Access code
> 000000 <
Activate editing mode
5.
o
/
n
Change
number
q
/
p
Change
place
Access code
> ...... <
Note the new code in the
field below to make sure it is
not forgotten!
6.
2
> Access code <
...
Confirm selection
7.
q
+
p
(together)
0.007 PLA 4
Instrument in normal
operation
New access code:
A forgotten access code can be deleted only by a SIGRIST service technician!
4.7
Additional possibilities
This Instruction Manual describes only those options that are required for
normal operation of the installation. Additional parameters enable you to adapt
the StackGuard optimally to your particular measuring duty. For example, you
can alter the behavior of the reading outputs or test the installation in the
manual mode.
Information on these additional possibilities is given in the attached Reference
Handbook.
Access code