Sigrand SG-1C-111, Руководство пользователя

Страница: 58 / 59

Sigrand IP video cameras, Release 1.0.101
ˆ System Start
The System Start event arises upon starting of the camera.
ˆ Input Signal
The Input Signal event arises when the corresponing pin of the back panel con-
nector is closed to the ground.
The front of the pulse is considered as an event.
The Input Signal Number pulldown menu species one of the two available inputs,
1 (pin 14) or 2 (pin 7).
ˆ Motion Detector
The Motion Detector event is caused by a motion detection signal.
Note: for motion detection an MJPEG codec is required for one of streams.
Action
The Action pulldown list species one of the available actions:
ˆ Output Signal
A logic `1' pulse (about 3.3 V) is applied to Pin 13 of the rear panel connector.
The duration of the pulse is specied in milliseconds by the Output Signal Dura-
tion input eld.
The default state of the output signal is logic `0'.
ˆ Play Alarm
An alarm audio signal is applied to the (analog) line output of the camera.
ˆ Send Picture
A single JPEG frame is sent to the URL dened by the Destination Address input
eld.
scheme://user:pass@someserver.com/some/path/
where:
scheme - ftp or http URL scheme
user:pass - optional username and password of the server
someserver.com - server address
/some/path - an existing path on the server, where the le
with a JPEG picture will be placed.
The le has a name derived from the time of the shot in the local
timezone:
YYYY-MM-DD_hh-mm-ss-msc.jpeg
54 Chapter 2. User Guide