Step 4
Push the lever backward to lower down the pinch rollers (Figure 2-21).
Step 5
After turn on the power, the tool carriage will measure the size of the media automatically. And the plotting
cutter begins to work.
(X)
Incorrect
2.3.2 Loading the Roll Media
You can use the desktop media support system for roll media. Please refer to Chapter 2.2.2~2.3 for
hardware setup, and Chapter
2.5.1 for media loading.
2.4 Cable Connection
The cutting plotter communicates with a computer through
Serial port (RS-232C)
. This chapter shows you how to
connect the cutting plotter to a host computer and how to set up the computer/cutting plotter interconnection.
!!
Notice:
When USB connection is enabled, serial port will be disconnected automatically.
Содержание Enduracut
Страница 1: ......
