Signode LITTLE DAVID LX600, Руководство оператора

Страница: 51 / 91

Chain Path and Tension Adjustment (Note: Transparent view to observe
chain path shown above.)
Electrical Control Box
Your system uses an Allen-Bradley Micro830 ™ PLC to control its function
along with a series of terminal blocks and relays. A copy of the PLC program
is available upon request for your reference. It is not advised that you alter
this program unless you have the appropriate Rockwell Software on your
computer and are experienced with PLC programming.
DO NOT Work on the Electrical Control Box while Unit is Plugged In.
Follow proper Lock out / Tag out Procedures and make sure that power is
off to the entire system and that the unit is unplugged before working on the
electrical system / control panel of the unit. Ensure all guards are in place
during operation.
The control box is supplied power directly by plugging it into a power
receptacle.
Note: There is no On/Off Switch on this unit.
Note: It is best practice is to provide a dedicated electrical circuit to the
Labeler system for trouble free operation. Any unexpected surge or voltage
spike to the electrical line may cause damage to the electrical panel circuitry,
PLC and associated PLC components.
All related parts and service documentation is located in Section 12:
Assemblies and Schematics.
