MAINTENANCE PROCEDURES - FEEDWHEEL CLEARANCE
The feedwheel to roller clearance may require readjustment if the feedwheel or roller has been
replaced. The freewheel clearance should also be inspected during routine tool maintenance
procedures. Adjust the feedwheel clearance as follows:
1.
Using a 2.5mm hex wrench turn the
adjustment screw which can be
accessed through the top of the tool as
shown.
2.
Turn the adjustment screw clockwise
for greater clearance and counter-
clockwise for less clearance. Turn the
adjustment screw only in 1/8 turn
increments. After each 1/8 turn, test the
tool from proper operation.
25
Содержание GRIPPACK
Страница 6: ...MAJOR TOOL COMPONENTS 6 TENSIONER FOOT FEEDWHEEL LEVER R__OLLER ...
Страница 26: ...26 ...
