Signode 513684, Руководство по эксплуатации, частям и безопасности

Страница: 2 / 24

2
READ THESE INSTRUCTIONS CAREFULLY.
FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY.
GENERAL SAFETY CONSIDERATIONS
1. EYE INJURY HAZARD.
Failure to wear safety glasses with side shields can result in severe eye injury or
blindness. Always wear safety glasses with side shields which conform to ANSI
Standard Z87.1 or EN 166.
2. CUT HAZARD.
Handling strap or sharp parts could result in cut hands or fingers. Wear
protective gloves.
3. TRAINING.
This dispenser must not be used by persons not properly trained in its use. Be certain that
you receive proper training from your employer. If you have any questions contact your
Signode Representative.
4. DISPENSER CARE.
Take good care of this dispenser. Inspect and clean it weekly. Replace any worn or broken
parts.
5. WORK AREA.
Keep work areas uncluttered and well lighted.
SAFETY PROCEDURES FOR DISPENSER OPERATION
1. Before loading a coil of strap into the dispenser, read the loading and safety instructions.
!
Install dispenser properly before using it.
!
Maintain proper footing and balance when loading dispenser.
!
Do not load dispenser when you are in an awkward position. Use proper lifting
techniques when loading a coil of strap into the dispenser.
!
When mounting dispensers on wall and/or columns, use the proper Signode suspension
brackets.
2. Tuck strap end back into dispenser straptroller area when not in use.
CUTTING TENSIONED STRAP
Use only cutters designed for cutting strap; never use claw hammers, crowbars, chisels, axes or
similar tools. Such tools will cause the strap to fly apart with hazardous force. Before using any
Signode product read its Operation and Safety manual.