15
1 1/4 in
21 1/4 in
8 in
8 in
36 in
1 1/4 in
14 11/16 in
14 11/16 in
1 1/4 in
WALL MOUNT GUIDE
UP
INSTALLATION
Wall mount procedure
Mark Screw Locations on Wall as per Figure 9 below:
Fig. 10:
• Drill holes at marked locations using:
• A 9/64 in. drill bit for wall stud mounting
• A 5/16 in. drill bit if using expansion brackets for hollow
wall mounting. Drill 5/16 in. holes at least 1 in. deep
WARNING
ELECTRICAL, PLUMBING OR GAS LINES MAYBE IN WALL.
Before cutting, drilling or hammering verify their location. If needed,
contact your electrician, plumber or service person
WALL MOUNTING
IMPORTANT: If wall mounting an infrared unit, the distance from the floor to bottom
of the appliance must be at least 10 in. high
Fig. 9: Wall mounting dimensions
21 1/4 in
Fig. 9:
• Mark holes at locations shown in
Fig. 9 using a square
• Check that holes are straight and
level before drilling by using a
level
