background image

  [email protected]

MODEL: ET0195  PRODUCT CODE: 55913   12/2016 23

  AFTER SALES SUPPORT
                   1300 777 137

Advanced Operations (cont.)

Note: 

If you make no entry in the menu for about 6 seconds, the menu will close.

talk on a private sub-channel inside an active channel and is used to reduce the annoyance of listening to 

other users on a shared channel. Each channel has 38 CTCSS codes and 61 DCS codes.

CTCSS

The Continuous Tone Coded Squelch System (CTCSS) is a Squelch quieting system that allows groups of 

users to share the same channel without disturbing each other. It uses 1 of 38 low frequency tones to open 

and close the Squelch on the radio. The CTCSS codes are not encrypted and do not prevent others from 

hearing your transmission if they are on the same channel and sub-channel. They simply provide you with 

a quieter channel by preventing you from hearing transmissions that are not using the same code as you 

and are therefore not directed at you. Please refer below for the CTCSS Frequency Table and see page 25 

for DCS Frequency Table..

CTCSS Frequency Table

CTCSS 

FREQ. No.

CTCSS FREQ. 

(Hz)

CTCSS 

FREQ. No.

CTCSS FREQ. 

(Hz)

CTCSS 

FREQ. No.

CTCSS FREQ. 

(Hz)

CTCSS FREQ. 

No.

CTCSS FREQ. 

(Hz)

1

67.000

11

97.400

21

136.500

31

192.800

2

71.900

12

100.000

22

141.300

32

203.500

3

74.400

13

103.500

23

146.200

33

210.700

4

77.000

14

107.200

24

151.400

34

218.100

5

79.700

15

110.900

25

156.700

35

225.700

6

82.500

16

114.800

26

162.200

36

233.600

7

85.400

17

118.800

27

167.900

37

241.800

8

88.500

18

123.000

28

173.800

38

250.300

9

91.500

19

127.300

29

179.900

10

94.800

20

131.800

30

186.200

Содержание ET0195




































Отзывы: