MODEL: ET0195 PRODUCT CODE: 55913 12/2016
28
AFTER SALES SUPPORT
1300 777 137
Advanced Operations (cont.)
Repeater Function Setting
Repeater facility is a third party facility which is only available in some local areas and assists you in
extending your communication range. Only use this function for extending your communication range
when you know the channel of the repeater facility in your area. Repeaters are used to retransmit or relay
your signal. Repeaters will extend the range of the Radio and overcome the shielding effect caused by solid
obstructions. To activate repeater function.
1.
Press the menu
(M)
button seven times and
“rP”
will be flashing.
2.
Press the up
( )
or down
( )
buttons to enable
(“ON”)
or disable
(“OF”)
the repeater function.
3.
Press the PTT button to confirm your selection and return to the standby mode.
Note:
Channels 1-8 and 31-38, 41-48 and 71-78 are used as repeater channels with 750kHz offset.
Channels 1-8 and 41-48 are used for mobile reception and channels 31-38 and 71-78 for mobile
transmission. Only use this repeater function when a long distance communication via the local repeater
facility is specifically required. Unless it is necessary, avoid operation on locally used repeater input
channels (31-38 and 71-78) or locally used repeater receiving channels (1-8 and 41-48).
