AFTER SALES SUPPORT
1300 777 137
MODEL: EA2105 PRODUCT CODE: 706170 10/2021
12
Filling the Fog Liquid Tank
Before operating the Fog Machine, the tank must first be filled with fog
liquid. Please follow the instructions below for how to fill the tank of the
Fog Machine.
NOTE:
It is recommended to only use the fog liquid supplied or a high
quality, water-based fog liquid in the Fog Machine.
NOTE:
Quality, water-based fog liquids are available at most major retailers.
1. Ensure that the Fog Machine is completely cool, and the power cord
is disconnected from the power outlet.
2. Position the Fog Machine on a dry, flat, stable surface close to a
power outlet.
3. Unscrew the fog liquid tank cap and carefully add 500mL (0.5L) of
the fog liquid to the tank (Fig. 6 and Fig. 7).
4. Replace the fog liquid tank cap making sure not to pinch the tube
connected through the tank lid when screwing on the lid.
WARNING:
Do not use the Fog Machine if the Fog Machine tank cap is not securely screwed in
position.
NOTE:
The fog liquid tank capacity is 500mL (0.5L). Do not overfill the tank as this will affect the
operation of the Fog Machine.
WARNING:
Never open the tank lid when the Fog Machine is switched ON, this can damage the Fog
Machine and cause injury to persons.
WARNING:
Do not attempt to add fog liquid to the tank while the Fog Machine is still hot or
connected to a power outlet. Always switch off and unplug from the power outlet and allow the Fog
Machine to cool down completely before filling the tank with the fog liquid.
NOTE:
If liquid spills onto or into the Fog Machine, leave it to dry completely before plugging in.
NOTE:
Do not operate the Fog Machine without fog liquid as this will damage the machine. When the
tank requires refilling, the sound of the pump will increase in volume and there will be less fog being
emitted from the Fog Machine. When this occurs, turn off the Fog Machine immediately, disconnect
the power cord from the power outlet, allow time for the Fog Machine to cool and then follow the
instructions above for how to fill the tank.
Operating the Fog Machine
Once you have carefully filled the Fog Machine with fog liquid it is now ready to use.
1. Connect the power cord to a power outlet and switch on. The Fog Machine will now begin to heat up.
2. Once the Fog Machine has reached operating temperature, the indicator light on the controller
will illuminate (red).
Operating Instructions
Fig. 7
Fig. 6
