AFTER SALES SUPPORT
1300 777 137
MODEL: EA2105 PRODUCT CODE: 706170 10/2021
11
Assembly
The Fog Machine comes in three parts (main body, handle, and the
controller) which makes assembling quick and easy.
1. Place the Fog Machine on a dry, flat, stable surface. Ensure it is not
subject to vibrations or movement.
2. Place the rubber washer over the hole on the side of the Fog
Machine (Fig. 1).
3. Then place the handle so that the hole on the arm of the handle is
aligned with the hole on the rubber washer and the Fog Machine
main body (Fig. 2).
4. Then place the metal lock washer so that the hole on the washer is
aligned with the hole on the handle (Fig. 3).
5. Insert the screw end of the knob through the holes on the washer
and handle and into the Fog Machine. Turn the knob in a clockwise
direction until the handle is securely attached to the Fog Machine
(Fig. 4).
6. Repeat steps 2-5 to attach the handle to the other side of the Fog
Machine.
7. Insert the controller cable plug into the controller cable socket on the
back of the Fog Machine (Fig. 5).
NOTE:
The handle must be attached to the Fog Machine before use.
WARNING:
The outer surfaces of the Fog Machine will get very hot
during use. Always use the handle when carrying the Fog Machine.
WARNING:
Always allow the Fog Machine to cool down completely
before handling the Fog Machine.
WARNING:
Do not operate the Fog Machine without the handle
securely attached.
CAUTION:
Do not over tighten the screws when attaching the handle as
this will thread the holes.
NOTE:
The rubber washer will help protect the exterior of the Fog
Machine and prevent the handle from scratching the metal surface
during use.
Getting Started (cont.)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
