AFTER SALES SUPPORT
1300 777 137
05
MODEL: EA0588 PRODUCT CODE: 51830 11/2016
General Information and
Safety Instructions
RETAIN FOR FUTURE USE
Read this manual thoroughly before first use, even if you are familiar with this type of
product. The safety precautions enclosed herein reduce the risk of fire, electric shock
and injury when correctly adhered to. Please keep this user manual in a safe place along
with your purchase receipt and carton for future reference. If applicable, pass these
instructions on to the next owner of the product. Always follow basic safety precautions
and accident prevention measures when using an electrical product.
Electrical Safety and Cord Handling
1. Before installing the Jukebox, ensure the electrical voltage and circuit frequency
correspond to the voltage stated on the rating label of your product and your power
outlet is properly earthed.
2. Do not use the Jukebox with an extension cord unless this cord has been checked
and tested by a qualified electrician. If an extension cord is used, please ensure that it
has a rating equal or exceeding the rating of this product.
3. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or
pull the cord around sharp edges or corners.
4. Check the power cord regularly for visible damage. If it is damaged, please contact the
After Sales Support line for further advice.
5. When the Jukebox is not in use, switch it off and unplug from the power outlet. Do not
leave the product unattended when connected to the power supply. To unplug, grip
the plug and pull from the power outlet. Never pull by the cord.
6. This product is not user-serviceable. Contact with high voltage components may
cause a risk of electric shock, therefore do not attempt to open the back cover of the
Jukebox.
7. The installation of a residual current device (safety switch) is recommended to provide
additional safety protection when using electrical devices. It is advisable that a safety
switch with a rated residual operating current not exceeding 30mA be installed in the
electrical circuit supplying the device. See your qualified electrician for professional
advice.
