SIGNIFY EA0588, Инструкция по эксплуатации

Страница: 11 / 33

AFTER SALES SUPPORT
1300 777 137
11
service@unclebills.com.au
MODEL: EA0588 PRODUCT CODE: 51830 11/2016
Product Overview (cont)
Next /Tuner+
Use the Next /Tuner+ button to skip back to the previous track while it is playing or
to scroll through tracks to add to a playlist (applicable for CD, USB or SD card playback
modes). The Next
/Tuner+ is also used in RADIO mode to manually tune stations by
+1MHz increments for ‘‘FM’’ or +10KHz for “AM” or hold the Next /Tuner+ button to
automatically start and search for strong frequencies for the next station.
Volume Dial
Use the volume dial to control the volume of the Jukebox. To increase the volume, turn the
volume dial clockwise and to decrease, turn the dial anticlockwise.
NOTE: Using the Jukebox for an extended periods at high volume can cause the device
to overheat and may damage the internal components. Do not operate the Jukebox at a
high volume for extended periods of time.
Lighting Effects ON/OFF
The Jukebox features 7 fun colour changing LED lights on the front panel of the device. To
turn on the LED lighting effect, simply press the Lighting Effects ON/OFF button. The LED
lights will illuminate.
NOTE: The lighting effects operate independently of the Power /Mode. The Lighting
Effects ON/OFF button controls power to the lighting effect and the Power /Mode
button controls power to the audio functions and display of the Jukebox.
On the rear of the Jukebox, there is an LED Light Mode Switch which has 2 settings;
“PLAY” and “HOLD”. When switched to “PLAY” mode, the colour changing LED light
tubes will fade in and out across several different colours continuously. When set to HOLD
mode, the LED lights will be illuminated in one colour only. By switching to PLAY mode,
the LED lights will begin to cycle through the colours again. By switching back to HOLD,
different colours can be selected to display and hold (please note that these colours
have been predetermined and may not be the exact same colour as the light tube was
illuminated when switched to the “HOLD” mode).
To turn OFF the lighting effects all together, simply press the Lighting Effects ON/OFF
button once again, and all lighting effects will no longer be illuminated.