Signet QV-3020, Руководство пользователя

Страница: 10 / 24

7
Auto Switch Function:
When the system is in live view or recording mode, press and hold the [ QUAD ]
button for three (3) seconds to enable the auto switch function.
In auto switch mode each screen / channel will be displayed for three (3)
seconds, including the “Quad” view. This process will continue until any button is
pushed.
For example, pressing [ Stop ] will stop the auto switch function and may
stop the unit recording. (depending on “Record Schedule” settings)
(
Refer to 5.7 Schedule Set
).
2. QUAD MODE:
The DVR will compress and record all 4 channels into one file; therefore, you
cannot enlarge a single channel to full screen in play back mode or live
monitoring mode.
Note: The “Auto Switch” function is not available in QUAD MODE.
Chapter 5: DVR Setup -
5.5 Record Frame
Record frame(rate) will affect the appearance of moving objects in the recorded
video. Higher framerates will show fast movement more clearly, however, they also
use more hard disk space.
The systems default value is 25fps (frames per second), which means the
system will record 25 frames per second shared by all cameras. You can set the
frame rate to 25, 12, 8, 6,4,3,2 or 1 frame per second.
Chapter 5: DVR Setup -
5.6 Record Quality
There are three levels of recording quality: High, Normal and Low.
The higher you set the quality setting the more hard disk space will be used.