30
OPERATION
a
Tank cover
b
Fill lid
CAUTION
• Make sure the tank cover and fill lid are closed
before putting the tank in the oven.
• Use potable water only.
• Do not fill the steam feeder tank with any fluid or
mixture other than water.
• Do not fill the tank with hot water.
• Fill the steam feeder tank up to the line indicated
on the front.
• Do not tilt the steam feeder tank while it is full.
• Discard any remaining water and clean the
steam feeder tank after cooking.
• Use the steam feeder tank only for its intended
purpose of providing water for steam cooking.
• Monitor the water level in the tank and refill as
needed for steam cooking. Use oven mitts to
avoid burns when handling the hot tank.
6
Carefully insert the tank into the steam feeder
slot, making sure to keep the tank level while
carrying it. If the tank is not kept level, water
will drain out of the tubes in the back.
7
Slide the tank into the slot until it clicks into
place.
Steam-Combi Mode
The Steam-Combi mode heats food gradually,
using both the oven heating elements and moist
steam heat. The oven can be programmed to cook
at any temperature from 210
℉
(100
℃
) to 550
℉
(285
℃
). Preset temperature options start at 350
℉
(175
℃
).
Setting Steam-Combi Mode
1
Turn the Oven Mode knob to select the
Steam
Cook
mode.
2
Touch
Steam-Combi
in the display.
3
Select the desired temperature and steam
level: Low, Medium, or High.
4
If desired, scroll to set the cook time and
delayed start time. Touch the arrow key on
the right side of the display to see the delayed
start time settings.
5
Touch
Start
.
6
Once cooking is finished, allow the oven to
cool completely. Then wipe up any water left
on the oven interior.
NOTE
• Once Steam-Combi cooking is started, an
indicator on the display shows the status of the
steam function.
• Make sure the steam feeder tank is filled with
water before starting the Steam-Combi mode. If
the water in the tank runs out during cooking, a
chime sounds and a popup appears in the
display. The oven continues to cook without
steam.
• Remember to drain the steam feeder tank after
use.
• When the temperature rises in the oven, steam
may not be visible.
• It is normal to hear the sound of boiling water
from the steam generator while running the
steam functions.
Changing the Steam Cook Settings
1
Touch
Edit
in the display to bring up the Cook
Settings screen.
2
Adjust the settings as desired.
3
Touch
Start
.
To Stop Steam Cooking
Touch
Stop
in the display, and select
Yes
, or turn
the Mode knob to the
OFF
position.
us_main.book.book Page 30 Monday, April 18, 2022 8:57 AM