30
Side-by-Side Flush Installation
FLUSH INSTALLATION CLEARANCES
NOTE:
When installing products with a partition between them, follow the standard installation.
The minimum size of the partition is 6" (15.2 cm) to avoid interference between the doors.
53 3/4"
(1365 mm)
79 7/8"
(2029 mm)
(451 mm)
17 3/4"
(908 mm)
35 3/4"
DUAL 18" AND 36" COLUMN
S
Door Panel
Door Panel
NOTE:
When installing 2 side-by-side products with
one left and one right door swing, 1/16" (2 mm)
clearance is required between the products.
This applies to both new installations and
must be used to seal the appliances together.
A
The kit contains a sealing mat which helps prevent
condensation from forming between the two
appliances.
accessories are missing.
2. Place appliances near to each other in the
3. Remove the base panels from both appliances.
4. Attach the included sealing mat on the side of the
freezer that faces the refrigerator. (The sealing mat
should be between the two appliances after they
are connected.)
Install the gray sealing mat over the preinstalled
black sealing strips so that the edge of the mat is
T
A
from Signature Kitchen Suite (part number
SKSFJ800P).
sealing mat
S
strip
sealing strip
(both sides)
1X
2X
1X
1X
1X
1X
6X
4X
4X15
M6X20
