25
ENGLISH
Installing Door Panels
Typical panel dimensions are based on an 84" (213.4
T
placement must be adjusted for panels exceeding typical
dimensions.
T
upper then lower drawer panel, if needed.
1. Place the door panel face down on a protected
surface.
2. Locate the correct side of the door panel template for
top and left sides of the panel.
3. Use the template to mark the correct screw locations
on the back of the panel.
S
and right sides of the panel.
5. Use the template to mark the correct screw locations
on the back of the panel.
the top on each side. Stop when the screws are 3/16"
(4 mm) proud of the panel. These will be the
support screws during the panel installation.
7. Insert the support screws in the slotted holes on the
appliance door mounting brackets so that the panel is
hanging on the door.
CAUTION
Beware of pinch points when installing door panels or opening
and closing doors.
A+1/8”
A
BACK OF
DOOR PANEL
4X12 20 ea
BACK OF
DOOR PANEL
BACK OF
DOOR PANEL
BACK OF
DOOR PANEL
A+1/8”
A
BACK OF
DOOR PANEL
4X12 20 ea
BACK OF
DOOR PANEL
BACK OF
DOOR PANEL
BACK OF
DOOR PANEL
Mounting door panel
C
TOP DOOR PANEL
BOTTOM DOOR PANEL
