Signature Kitchen Suite SKSFD3613 Series Скачать руководство пользователя

Страница: 52 / 64

TROUBLESHOOTING

Craft Ice

Ice

Problem

Possible Cause & Solution

Icemaker is not

making ice.

Refrigerator was recently installed or icemaker recently connected.

• The icemaker begins producing ice approximately 48 hours after the appliance is initially

installed. The first batches of ice may not be round and clear.

Icemaker is not

making enough ice.

In 3 ICE mode (default setting), the Craft Ice icemaker produces 1 batch of round ice

about every 24 hours.

• For more ice, select the 6 ICE mode.

Problem

Possible Cause & Solution

Icemaker is not

making enough ice.

Demand exceeds ice production capacity.

• Refer to the Automatic Icemaker section for ice production capacity to check the amount

of ice produced in a 24 hour period.

House water supply is not connected, valve is not turned on fully, or valve is clogged.

• Connect the refrigerator to a cold water supply with adequate pressure and turn the water

shutoff valve fully open. If the problem persists, it may be necessary to contact a plumber.

Water filter has been exhausted.

• Replacing the water filter is recommended:

-  Approximately every six months.
-  When the water filter indicator turns on.
-  When the water dispenser output decreases.
-  When the ice cubes are smaller than normal.

Low house water supply pressure.

• The water pressure must be between 20 and 120 psi (138 and 827 kPa) on models without

a water filter and between 40 and 120 psi (276 and 827 kPa) on models with a water filter.

If the problem persists, it may be necessary to contact a plumber.

Reverse osmosis filtration system is used.

• Reverse osmosis filtration systems can reduce the water pressure below the minimum

amount and result in icemaker issues. (Refer to the Connecting the Water Line section.)

Tubing connecting refrigerator to house supply valve is kinked.

• The tubing can kink when the refrigerator is moved during installation or cleaning

resulting in reduced water flow. Straighten or repair the water supply line and arrange it to

prevent future kinks.

Doors are opened often or for long periods of time.

• If the doors of the unit are opened often, ambient air will warm the refrigerator which will

prevent the unit from maintaining the set temperature. Lowering the refrigerator

temperature can help, as well as not opening the doors as frequently.

Doors are not closed completely.

• If the doors are not properly closed, ice production will be affected. See the "Doors will not

close correctly or pop open" section in Parts & Features Troubleshooting for more

information.

The temperature setting for the freezer is too warm.

• The recommended temperature for the freezer compartment for normal ice production is

0 °F (-18 °C). If the freezer temperature is warmer, ice production will be affected.

Содержание SKSFD3613 Series

































































Результаты поиска

Содержание SKSFD3613 Series

Отзывы:

Похожие инструкции для SKSFD3613 Series

Бренды по названию

Популярные бренды

Signature Kitchen Suite SKSFD3613 Series, Руководство пользователя

Результаты поиска

Содержание SKSFD3613 Series

Отзывы:

Похожие инструкции для SKSFD3613 Series

Бренды по названию

Популярные бренды