10
OPERATION
Before Use
&OHDQWKHUHIULJHUDWRU
Clean the refrigerator thoroughly and wipe off all dust that accumulated during shipping.
CAUTION
%
Do not scratch the refrigerator with a sharp object or use a detergent that contains
DOFRKRODÀDPPDEOHOLTXLGRUDQDEUDVLYHZKHQUHPRYLQJDQ\WDSHRUDGKHVLYHIURP
the refrigerator. Remove adhesive residue by wiping it off with your thumb or dish
detergent.
%
Do not peel off the model or serial number label or the technical information on the
rear surface of the refrigerator.
2SHQUHIULJHUDWRUGRRUWRYHQWLODWHWKHLQWHULRU
The inside of the refrigerator may smell like plastic at first. Remove any adhesive tape from
inside the refrigerator and open the refrigerator door for ventilation.
Connect the power supply.
Check if the power supply is connected before use.
:DLWIRUWKHUHIULJHUDWRUWRFRRO
Allow the refrigerator to run for at least two to three hours before putting food in it.
CAUTION
%
Putting food in the refrigerator before it has cooled could cause the food to spoil, or a
bad odor to remain inside the refrigerator.
7KHUHIULJHUDWRUPDNHVDORXGQRLVHDIWHULQLWLDORSHUDWLRQ
This is normal. The volume will decrease as the temperature decreases.
OPERATION