Signature Kitchen Suite Q50941E, Руководство пользователя

Страница: 29 / 44

28
SMART FUNCTIONS
SIGNATURE KITCHEN SUITE
Application Features
Monitoring
Use this function to check the current status and
operating time from one screen.
Push Alerts
Turn on the Push Alerts to receive appliance status
notifications.
The notifications are triggered even if the
SIGNATURE KITCHEN SUITE application is off.
Interworking Function
The Signature Kitchen Suite hood automatically turns
on/off the vent fan when paired with the cooktop. Both
products must be connected to the Signature Kitchen
Suite application and have an interworking function.
NOTE
•
The appliance is not intended to be operated by
means of remote control system.
•
To disconnect the appliance from the Wi-Fi
network, delete the cooktop from the list of
connected products in the Signature Kitchen
Suite application.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit http://opensource.
signaturekitchensuite.com. In addition to the source
code, all referred license terms, warranty disclaimers
and copyright notices are available for download.
SIGNATURE KITCHEN SUITE will also provide open
source code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as the
cost of media, shipping, and handling) upon email
request to opensource@signaturekitchensuite.com.
This offer is valid for a period of three years after our
last shipment of this product. This offer is valid to
anyone in receipt of this information.
Wireless LAN module Specifications
Model LCW-009
Frequency
Range
2412~2462 MHz
Output Power
(max.)
IEEE 802.11 b : 20.41 dBm
IEEE 802.11 g : 24.82 dBm
IEEE 802.11 n (HT20) : 24.86 dBm
IEEE 802.11 n (HT40) : 24.92 dBm
FCC Notice
The following notice covers the transmitter module
contained in this product.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules and also Part 18 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and the receiver.
•
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15, Part 18 of the
FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference
and
2) this device must accept any interference received,
including interference that may cause undesired
operation of the device.
Any changes or modifications in construction of this
device which are not expressly approved by the party
responsible for compliance could void the user’s
authority to operate the equipment.
FCC RF Radiation Exposure
Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
This equipment should be installed and operated with
minimum distance 20 cm (7.8 inches) between the
antenna and your body. Users must follow the specific
operating instructions for satisfying RF exposure
compliance.