31
TROUBLESHOOTING
ENGLISH
TROUBLESHOOTING
FAQs: Frequently Asked Questions
Q:
What are the best temperature settings for my freezer?
A:
The default setting for the freezer is 0° Fahrenheit (-18° Celsius). Adjust these settings as necessary
to keep food at desired temperatures. Ice cream should be firm and ice cubes should not melt in the
freezer. To switch the display from Fahrenheit to Celsius, press Freezer button first to wake the
display then press and hold the Freezer and Smart Grid buttons until you hear a beep and the settings
in the display change.
Q:
How do I set the freezer temperatures?
A:
Continually press the
Freezer
button on the control panel until the desired temperature appears. The
numbers will cycle from highest to lowest and then return to the highest again with continuous
pressing.
Q:
Why do I hear a buzzing noise from my freezer periodically?
A:
This may happen if you do not have a water source attached to your freezer and the icemaker is
turned on. If you do not have a water source attached to freezer you should turn the icemaker off on
control panel.
Q:
Why does the icemaker tray look crooked?
A:
This is a normal part of the icemaker cycle. The icemaker tray may appear level or with a slight tilt.
The change in position is to assist in the freezing process.
Q:
My refrigerator is powered on and the controls are working, but it’s not cooling and the display
shows “OF” (see below). What is wrong?
A:
The refrigerator is in Demo Mode. This mode disables cooling to save energy while the appliance is
on display in a store. To restore normal operation, press Freezer button first to wake the display then
press and hold the Freezer and Water Filter Reset buttons until you hear a beep and temperature
setting appear on display. Use the same procedure to return the refrigerator to Demo Mode, if desired.
* POWER
Содержание E18MRE07
Страница 43: ...42 Memo MEMO ...
Страница 44: ...43 MEMO MEMO ...
Страница 45: ...Customer Information Center For inquires or comments call 1 855 790 6655 USA Consumer User ...