background image

15

Island Mount Range Hood Installation Instructions

 

pressing the “+” button and 1 minute decrements by pressing the “-”  button, with the default set at 15 

 

minutes, from as short as 1 minute to as long as 99 minutes. After the desired setting has been achieved,   

 

the Speed/Timer Indicator will return to fan speed mode and Power-Off Delay Control button will flash until  

 

power OFFafter a few seconds. Changing speed does not affect the delay shutoff function.

 

While the fan is OFF, press the TIMER button once to turn ON the fan at Quiet (F1) mode with a 15 minute  

 

delay shut off activated.

 

 

Immediate Power-off

 

While the fan is operating, press the OFF button once to turn OFF the fan immediately.

Light Control using remote control

:

The LAMP button operates independently from the other buttons but can be turned OFF by the OFF and TIMER 

fuction. Activating the delay function will turn halogen lights OFF.

 

Do not touch the lights until switched OFF and cooled.

 

While the halogen lights are OFF, press the LAMP button once to turn halogen lights ON. Light Control but 

 

ton will light up.

 

 

 Press the LAMP button again to turn OFF the lights.

Содержание Island Mount Range Hood
























Отзывы: