10
Island Mount Range Hood Installation Instructions
8.
Recirculating (Non-Vented) Kit
: If Re-Circulating Kit is not purchased, skip this step. Install the duct tube onto
the air diverter and use duct tape to ensure a secure and air tight connection. See Figure 6C.
9. Hold upper chimney and lower chimney into position and remove the screwdriver that is holding them up. Slowly
slide down both chimneys until they sit on the hood. Connect the duct work and power cable, see figure 7A. Bring
the upper chimney up until it reaches the ceiling, secure it with two (2) 4mm x 16mm round phillips head screws as
shown in Figure 7B.
