8
5. The plaster guard is used as the installation guide
for the valve. The plaster guard should be �ush with
the �nished wall once the diverter valve is installed.
6. Connect the inlet of the diverter valve with the
outlet of the supply valve in the 1/2” or 3/4” pipe or
tube, using the inlet and outlet arrows as a guide.
7. Remove and discard the plaster guard.
OUTLET CONNECTIONS
1. There are 3 outlets on the diverter valve, providing 3
separate connections. Each outlet will connect one
end �xture, for example, showerhead, hand shower
and the tub spout.
2. The outlet sequence will start from the top, the
right and then the left.
3. After outlets have been installed turn on the water
supply to the diverter valve and check for leaks. Then
turn the water o� again.
TRIM INSTALLATION
Pressure Balance Trim
1. Secure parts as sh
own below
.
2. Install escutcheon and handle onto valve, as
refenced in below installation.
G L E N L E Y P R E S S U R E B A L A N C E
SHOWER HEAD AND BODY SPRAYS
SKU: 925471