Signature Hardware GLENLEY 925471 Скачать руководство пользователя страница 1

1

GETTING STARTED

BEFORE YOU BEGIN

We recommend consulting a professional if you are 

unfamiliar with installing plumbing �xtures. Signature 

Hardware accepts no liability for any damage to the wall, 

plumbing, shower, or for personal injury during installa-

tion.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage. If 

any damage is found, contact our Customer Relations 

team at 1-866-855-2284.

Ensure that you have gathered all the required 

materials that are needed for the installation.

G L E N L E Y   P R E S S U R E   B A L A N C E

SHOWER HEAD AND BODY SPRAYS

SKU: 925471

REVISED 03/17/2020

CODES: 153845, 316693, 330696, 500449, 514910

515429, 153843, 316691, 329640, 340722, 393068

153846, 316695, 500451, 514911, 515430, 515425

393066, 393064, 515432, 349137, 515431

TOOLS AND MATERIALS:

Adjustable Wrench

Flathead

Screwdriver

Phillips 

Screwdriver

Safety Glasses

Tape Measure

Keyhole Saw

Thermometer

Strap Wrench

Silicone Sealant

(100% Neutral Cure)

For Warranty information, please visit: signaturehardware.com/services/warranty

Painter’s Tape

Pliers

Hex Wrench

Long-nose Pliers

Thread Sealant

Pencil

Drill

Содержание GLENLEY 925471












Отзывы: