6. If your model has back wings, align the male the female brackets and slide the wing down into place, See
FigureD
.
Please Note there is a label on the brackets. Please assemble them as 1-1 and 2-2.
Figure D
Figure B
Figure C
4. INSTALL-FLOOR GLIDES BEFORE USE
Your li� chair has four adjust able floor glides. They are located in the owner’s package and must be installed before
use. These glides can be adjusted to level your li� chair. See
Figure B
.
WARNING
: Failing to install these floor guides may result in damage to your li� chair, flooring, and may cause the
chair to become unstable and fall over causing personal injury or death.
5. To install the back, align the female brackets in the back with the male brackets in the chair base, slide the back down
on the base. See
Figure C
Push down on the top of the back to lock the back into posi�on. You will hear a click from
each side of the chair to ensure the back is locked in properly.
7.
C
onnect the Power Transformer cable to the corresponding plug coming from the back of the chair.
Figure A #4
8.
C
onnect the Power
C
ord into the Power Transformer.
Figure A #5
9.
C
onnect the Power
C
ord into an electrical outlet near where the chair will be used
.
Figure A #6
SIGNATURE DESIGN BY ASHLEY ®
Page 4 of 17
00330B
All Rights Reserved.
Nov. 2021
