SignaMax I-100 Series Скачать руководство пользователя страница 2

www.signamax.com

I-100 SERIES

QUICK START GUIDE

Warnings and Cautionary Messages

Warning:

 This product does not contain any serviceable user parts.

Warning:

 Installation and removal of the unit must be carried out by qualified personnel only.

Warning:

 When connecting this device to a power outlet, connect the field ground lead on the 

tri-pole power plug to a valid earth ground line to prevent electrical hazards.

Warning:

 This switch uses lasers to transmit signals over fiber optic cable. The lasers are 

compliant with the requirements of a Class 1 Laser Product and are inherently eye safe in 

normal operation. However, you should never look directly at a transmit port when it is powered 

on.

Warning:

 When selecting a fiber SFP device, considering safety, please make sure that it 

can function at a temperature that is not less than the recommended maximum operational 

temperature of the product. You must also use an approved Laser Class 1 SFP transceiver.

Caution:

 Wear an anti-static wrist strap or take other suitable measures to prevent electrostatic 

discharge when handling this equipment.

Caution:

 Do not plug a phone jack connector in the RJ-45 port. This may damage this device.

Caution:

 Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards.

1

!

!

Содержание I-100 Series









Отзывы: