Signamax Connectivity Systems __________________________________________ 065-7942
31
Command Hierarchy
After logging in, press ? + <enter> to show the 9 command groups.
System
- System commands
Console
- Console commands
Port
- Port commands
VLAN
- VLAN commands
Aggr
- Aggregation commands
QoS
- QoS commands
Mirror
- Mirror commands
IP
- IP commands
SNMP
- SNMP commands
Ratelimit
- Rate setup commands
Exit
- Logout commands
Press ? or help to get help. The help depends on the context (where you are in the
program):
- At top level, a list of command groups will be shown.
- At group level, a list of the command syntaxes will be shown.
- If given after a command, the syntax and a description of the
command will be shown.
Entering Commands
To give any command, please key in your command and press enter.
Example:
1. Type “system” and press <enter> to get access to the system command group.
2. Type “Configuration” and press <enter> to perform “configuration”
You can type “up” and press <enter> to go back to the upper level.
