Signamax Connectivity Systems __________________________________________ 065-7942
11
Management guide
Access the Switch
This section shows you how to access and use the Switch’s advanced management
capability, which can be accessed via console port or Internet Browser over the
network (in-band).
Manage via Command Line Interface
To start the Command Line Interface, please connect a PC COM port to the RS-232
connector and activate a terminal emulation software (e.g. Windows’ HyperTerminal)
The terminal emulation software should be started in the following configuration:
1.
Data rate: 115200 baud
2.
Data format: 8 data bits, 1 stop bit and no parity
3.
Flow control: none.
4.
Click the property icon, select settings, make sure that: The Function, arrow,
and ctrl keys act as: Terminal keys, Emulation: VT100
Note: To manage via command line interface, please find the “Appendix” for more
information
Manage via Web Browser
To access the Web-based management interface, you should configure the
management station with an IP address and subnet mask that is compatible with your
switch.
The factory defaults of the Switch:
IP
：
：
：
：
Subnet Mask
：
：
：
：
255.255.255.0
1. Run your Web Browser and enter the appropriate IP address in the Address field:
2. Key in the user name and password.
The factory default value of User Name and
Password is “
admin
”.
192.168.0.254
