USER´S
MANUAL
10
www.signamax.eu
Management guide
Access the Switch
This section shows you how to access and use the Switch’s advanced management capability,
which can be accessed via console port or Internet Browser over the network (in-band).
Manage via Command Line Interface
To start the Command Line Interface, please connect a PC COM port to the RS-232 connector
and activate a terminal emulation software (e.g. Windows’ HyperTerminal) The terminal
emulation software should be started in the following configuration:
1. Data rate: 115200 baud.
2. Data format: 8 data bits, 1 stop bit and no parity.
3. Flow control: none.
4. Click the property icon, select settings, make sure that: The Function, arrow,
and ctrl keys act as: Terminal keys, Emulation: VT100.
Note: To manage via command line interface, please find the “Appendix” for more
information.
Manage via Web Browser
To access the Web-based management interface, you should configure the management
station with an IP address and subnet mask that is compatible with your switch.
The factory defaults of the Switch:
IP
192.168.0.254
Subnet Mask 255.255.255.0
Run your Web Browser and enter the appropriate IP address in the Address field:
