USER´S
MANUAL
20
www.signamax.eu
Rate Limit
The “Rate Limit” page allows users to limit the bandwidth for each port and configure the rules
for Storm Control, which limits the flow of broadcast and multicast.
To perform storm control:
1. Click on each drop list to specify a speed for each frame type.
2. Click the “Apply” button to execute your configuration.
SNMP
This device supports SNMP-management, which allows network administrators to monitor and
configure this device with SNMP software. To allow this device to be managed via SNMP:
1. Select “enable” in the drop menu.
2. Specify a trap IP. A trap IP is the destination port for sending trap information,
which is usually the IP address of network administrators.
3. Fill in a name in the “Community Get” column, which is the password for accessing
MIB with read-only authority.
4. Fill in a name in the “Community Set” column, which is the password for accessing
MIB with read-and-write authority.
