Signamax
™
065-7921PoE 12-Port 10/100/1000BaseT/TX Web Smart PoE Switch
44
Ingress Rule:
Each packet received by a VLAN-aware bridge will be classified to a VLAN. The
classification rule is described as follows.
1. If the VID of the packet is null VID (VID=0)or this packet is an untagged packet:
a. If there are still some other ways(e.g. protocol, MAC address, application, IP-subnet,
etc.) to classify the incoming packets beside port-based classification in implement
and these approaches can offer non-zero VID, then, use the value of VID offered by
other classifications for VLAN’s classification.
b. If there is only port-based classification in implement or other classification
approaches cannot offer non-zero VID for the incoming packets, then assign the
PVID to the incoming packets as VID for the classification of the VLAN group.
2. If the VID is not a null VID (VID
≠
0), then use the value to classify the VLAN group.
Egress Rule:
An egress list is used to make the tagging and forwarding decision on an outgoing port.
It specifies the VLANs whose packets can be transmitted out and specifies if the packet should
be tagged or not. It can be configured for port’s VLAN membership, and tagged or untagged
for a transmitted packet. When a packet is transmitted out, the VLAN bridge checks the port’s
egress list. If the VLAN of the packet is on the egress list of the port on which the packet
transmits out, the packet will be transmitted with the priority accordingly. If enabled, an egress
port will transmit out a tagged packet if the port is connected to a 802.1Q-compliant device. If
an egress port is connected to a non-802.1Q device or an end station, VLAN bridge must
transmit out an untagged packet, i.e. the tag has been stripped off in an egress port. Egress
rule can be set by per port.
Independent VLAN Learning (IVL):
It specifies the mode how to learn MAC address. For a specified VLAN, it will use an
independent filtering database (FID) to learn or look up the membership information of the
VLAN and decide where to go.
Shared VLAN Learning (SVL):
It specifies the mode how to learn MAC address. In this mode, some VLAN or all
VLANs use the same filtering database storing the membership information of the VLAN to
learn or look up the membership information of the VLAN. In 12 Gigabit Web Smart Switch
with PoE, you can choose a VID for sharing filtering database in Shared VID field if you wish to
use the existed filtering database. For a specified VLAN, when a MAC address is learned by a
switch, VLAN will use this formation to make forwarding decision.
Filtering Database:
Referred to as FID. It can provide the information where the packet will be sent to.
Filtering database will supply the outgoing port according to the request from forwarding
process with VID and DA
.
When a packet is received, if it has a non-zero VID, then FID will
offer the associated outgoing ports information to the packet.
In SVL, VLANs use the same Filtering Database. In IVL, VLANs use different FIDs. Any
VID can be assigned to the same FID by administrator.
