SignaMax 065-7910HPOEP, Руководство пользователя, Страница: 9 / 89

1 Preface
9
Visitor guest (none)
Can use the internet diagnosis commands,
such as ping command for system
maintainace, and the “show” commands
except “show user”, “show snmp
community”, “show snmp traps-host” and
“show snmp user”.
Note: Visitor can only access the switch by
Console port.
1.2.6 Login to the Switch
To access the switch web management function, open a web-browser and type in the default
address http://192.168.0.253 in the address field of the browser, then press the Enter key.

Note:
To log in to the switch, the IP address of your PC should be set in the same subnet
addresses of the switch. For the first time, set your PC IP address as 192.168.0.x ("x" is any
number from 1 to 254, except 253), subnet mask as 255.255.255.0.
And then a login window will appear, as shown follows. Enter the default User Name and
Password. The default values are set in section 1.2.5 Default Configuration . Then click the
Login button or press the Enter key, so that you can see the switch system information.
If you need to change the switch IP address at the first time, you can modify it through RS232
console, or using telnet to login, you can refer to “POE Entry-level Series Industrial Switch CLI
Guide V1.0”.
1.2.7 WEB Management Overview
This manual introduces the SIGNAMAX POE series industrial Ethernet switches by the WEB