SignaMax 065-7700, Руководство пользователя

Страница: 126 / 199

Hardened Managed PoE Ethernet Switch
User’s Manual 125
3.
Command Syntax:
Bandwidth BANDWIDTH
no bandwidth
BANDWIDTH
<1-10000000000 bits> (usable units: k, m, g)
<1-999>k|m for 1 to 999 kilo bits or mega bits.
1g for 1 giga bits.
4.
Example:
The following example shows the use of bandwidth BANDWIDTH ( 10 mega
bits ) to the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#bandwidth 10m
switch_a(config-if)#
Duplex:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2.
Usage:
Use duplex command to specify the duplex mode to be used for each
interface.
Use the
no duplex to disable this function.
3.
Command Syntax:
(no) duplex MODE
MODE specifies the duplex mode: auto, full, half.
4.
Example:
The following example shows the use of duplex MODE ( full ) to the interface
fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#duplex full
switch_a(config-if)#
Flow control:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).