Signamax
FO-065-7330 / 7340 Ethernet Switch
User’s Manual
6
Front Panel Display
An array of LED indicators on the front panel provides you with
instant feedback on each port status, and, helps you monitor and
troubleshoot the switch.
Figure 3: Front Panel LEDs
Œ
Power
This LED comes on when the switch is properly connected to power and
turned on.
•
Push Button
The push button is located at the right side of port 16 on the 16-Port Switch
or of port 24 on the 24-Port Switch.
Depress this button to use port 16 or 24, and press this button to use the
100BaseFX module.
Ž
Port Status
The RJ-45 ports numbered from 1 to 16 on the 16- Port Switch, or 1 to 24 on
the 24-Port Switch.
The LEDs are located at the left side of the switch, displaying status for each
respective port. Please refer to the table below for more information.
Consult the following table for details.
i
Before you use this table for troubleshooting, make sure the switch is
properly connected to power and turned on.