Signamax
FO-065-7330 / 7340 Ethernet Switch
User’s Manual
11
Connecting to Power
Locate the supplied AC power cord.
Step 1:
Connect the AC power cord to the receptacle at the back of the
switch.
Step 2:
Attach the plug into a standard AC outlet with a voltage range from
100~240Vac.
Step 3:
The power LED on the front panel will come on then.
Figure 5: Rear view of the switch
Connecting to Your Network
C
ABLING
Step 1:
First, ensure the power of the switch and end devices is turned off.
i
It may cause electric shock or any possible harm to you if the power is
not switched off.
Step 2:
Prepare cable with corresponding connectors for each type of port
in use.
Consult the table below for cabling requirements based on
connectors and speed considerations.
Step 3:
Connect one end of the cable to the switch and the other end to a
desired device.
Step 4:
Once the connections between two end devices are made
successfully, turn on the power and the switch is operational.