SignalFire Sentinel-yTherm Series, Инструкция по интерфейсу

Страница: 4 / 13

4
SignalFire Telemetry Rev 1.6
Setup
The nodes need to be set up for correct operation before being fielded. The configurable items include:
- Network selection
- Check-in period selection
- Thermocouple mode enable
All settings are made using the SignalFire Toolkit PC application and a serial programming cable.
Using the SignalFire Toolkit
The SignalFire Toolkit application can be downloaded at www.signal-fire.com/customer . After installation,
launch the software and the main toolkit window will open:
Select the COM port associated with the Sentinel N ode and click “Auto - Detect Device on COM Port.” This will
open the device configuration window, where all device settings can be configured.
WARNING: Perform the steps in this section (Setup) in a safe location only.