Operation
On
Optical
Fiber
Fusion
Splicer
When
Below
Situation
Happens
On
Fusion
Splicer
,
Please
Turn
Off
The
Fusion
Splicer
Immediately
And
Unplug
The
Power
Adapter
From
The
Power
Input
,
Otherwise
It
Will
Cause
The
Fusion
Splicer
May
Not
Work
Properly
Or
Can
Not
Be
Repaired
And
Other
Serious
Consequences.
》
Liquid, foreign matter into the inside of the fiber fusion splicer. There is a protective structure inside the
machine. A small amount of fiber debris will not affect the use, but please try to be careful not to fall in.
》
fiber fusion splicer is subjected to strong vibration and impact
There is no need to maintain the fiber fusion splicer internal parts, do not remove the fiber fusion splicer.
In the electrode discharge process of fiber fusion splicer, the voltage between the two electrode rod is up to
several dry volts, do not touch the electrode, otherwise will cause the fiber fusion splicer damage or personal
injury and other serious consequences.
storage (storage time less than or equal to 6 months) is: -20
℃
~60
℃
.
4.In order to ensure the safety of charging, the charging temperature range of lithium battery inside the welding machine
is O
℃
~ 40
℃
.
5.If the battery charging is abnormal or the battery display is abnormal, you can try to activate the battery manually.
For specific operation, please see: button combination function -- three to activate the battery
Notice:
1.Optical fiber fusion splicer is used for welding quartz glass fiber, please do not use this instrument for other purposes.
Please read this manual carefully before use.
2.Pay attention to clean the V groove and lens in the process of use (to clean V groove,you can use an art knife to
draw back and forth along the fiber groove, and then brush with a brush); Clean dust after use.
3.When the optical fiber fusion splicer moves from the low temperature environment to the high temperature environment,
try to take the gradual heating mode, otherwise the instrument will produce condensation, which has an adverse impact
on the instrument.
4.optical fiber fusion splicer is a calibrated precision instrument, please try to avoid strong vibration and impact. Special
carry case should be used for storage, and suitable cushioning case should be added outside the carry case for long-
distance transportation.
LCD display screen
1.The LCD screen of fiber fusion splicer is not touch screen.Do not use sharp objects to click on the LCD, do not force
the LCD.
2.Do not drop organic solvents or dirty sundries on the LCD screen, such as acetone, oil, antifreeze, ointment, etc.,
otherwise it may lead to abnormal LCD display.
3.Can use silken cloth or soft fabric to wipe clean liquid crystal screen.
4.There may be noise on the screen when the fusing machine windproof cover is opened or not put in the optical fiber.
These are not LCD fault, is a normal phenomenon
WARNINGS/PRECAUTIONS
WARNINGS/PRECAUTIONS
3
4
