SIGNALCORE SC5312A, Руководство по эксплуатации и программированию

Страница: 24 / 32

SC5312A Operating & Programming Manual Rev 1.0.2 21
Constants Definitions
// Parameters for storing data in the onboard EEPROM
#define MAXDEVICES 50 // bytes
#define MAXDESCRIPTORSIZE 25 // bytes
#define CALEEPROMSIZE 32768 // bytes
#define USEREEPROMSIZE 32768 // bytes
// Define labels
#define CH_I 0x00
#define CH_Q 0x01
#define RF_ATTEN1 0x00
#define RF_ATTEN2 0x01
#define RF_ATTEN3 0x02
#define RF_AMP1 0x00
#define RF_AMP2 0x01
// Define error codes
#define RESERVEDERROR -1
#define NOTCORRECTDEVICE -2
#define INPUTNULL -3
#define COMMERROR -4
#define INPUTNOTALLOC -5
#define EEPROMOUTBOUNDS -6
#define INVALIDARGUMENT -7
#define INPUTOUTRANGE -8
#define NOREFWHENLOCK -9
#define NORESOURCEFOUND -10
#define INVALIDCOMMAND -11
// Define device registers
#define INITIALIZE 0x01 // initialize the device
#define SET_SYSTEM_ACTIVE 0x02 // set the device “a ctive ” LED
#define RF_FREQUENCY 0x10 // set the frequency
#define RF_AMPLIFIER 0x12 // enable amplifiers
#define RF_ATTENUATION 0x13 // set attenuation for digital step attenuators
#define RF_PATH 0x14 // select the RF path
#define RF_FILTER_SELECT 0x15 // manually select the RF filter
#define LO_FILTER_SELECT 0x16 // manually select the LO filter
#define LO_OUT_ENABLE 0x17 // enable LO output
#define IF_GAIN_DAC 0x18 // set the I and Q chain IF gain
#define VCOM_OUT_DAC 0x19 // sets common output voltage
#define DC_OFFSET_DAC 0x1A // sets the DC offset
#define LINEARITY_DAC 0x1B // sets the linearity DAC (0 to 0xFFF)
#define STORE_STARTUP_STATE 0x1D // store the current state as default
#define USER_EEPROM_WRITE 0x1F // write a byte to the user EEPROM
#define GET_DEVICE_STATUS 0x20 // read the device status
#define GET_TEMPERATURE 0x21 // get the internal temperature of the device
#define USER_EEPROM_READ 0x23 // read a byte from the USER EEPROM
#define CAL_EEPROM_READ 0x24 // read a byte from the calibration EEPROM